Home Device & Hardware Xplorer 4G Hotspot — Setup Guide

Xplorer 4G Hotspot — Setup Guide

Last updated on Mar 19, 2026

The Xplorer 4G Hotspot is a portable WiFi device with a 16-hour battery, perfect for travel, RV use, or on-the-go internet.

What's in the Box

  • Xplorer 4G Hotspot
  • USB charging cable
  • Quick start guide

Setup Steps

  1. No SIM insertion needed: The Xplorer 4G Hotspot uses a built-in virtual SIM (vSIM). There is no physical SIM card to insert.
  2. Charge the device: Connect the USB cable to a power source and charge fully before first use.
  3. Power on: Press and hold the power button until the screen or LED lights up.
  4. Wait for connection: The device will connect to the cellular network within 1-2 minutes.
  5. Connect your devices: Check the device screen or label for the default WiFi name and password.
  6. Activate your plan: Visit xnetwifi.com/activate if your plan is not already active.

Battery and Charging

  • The Xplorer has a 16-hour battery life under typical use.
  • Charge with any USB power source (wall charger, car charger, power bank).
  • You can use the device while it is charging.
  • Battery life decreases with more connected devices and heavy data usage.

Travel and RV Tips

  • Coverage varies by location — check coverage.xnetwifi.com before your trip.
  • Place the hotspot near a window for best signal, especially in vehicles.
  • The device works anywhere within the XNET coverage area — no address lock.