The X Home 4G Router is a plug-and-play home internet solution. Here is how to get started.
What's in the Box
- X Home 4G Router
- Power adapter
- Ethernet cable
- Quick start guide
Setup Steps
- No SIM insertion needed: The X Home 4G Router uses a built-in virtual SIM (vSIM). There is no physical SIM card to insert. Proceed to step 2.
- Connect power: Plug the power adapter into the router and into a wall outlet.
- Wait for startup: The router will take 2-3 minutes to boot up. Watch the LED indicators — a solid connection light means it has connected to the network.
- Connect your devices: Look for the default WiFi network name (SSID) and password printed on the label on the bottom of the router. Connect your phone, laptop, or other devices.
- Activate your plan: If you purchased a device bundle, your plan may already be active. If not, visit xnetwifi.com/activate to choose and activate your data plan.
Optimal Placement
- Near a window for best cellular signal
- Elevated position (shelf or desk, not on the floor)
- Away from other electronics, microwaves, and thick walls
- Central location in your home for even WiFi coverage
Connecting Additional Equipment
The X Home 4G Router has Ethernet ports for wired connections. You can:
- Connect a computer directly for the fastest speeds
- Connect a mesh WiFi system for whole-home coverage
- Connect a network switch to add more wired devices
Use Cat6a or Cat7 Ethernet cables for best performance.
About the X Home vSIM
The X Home 4G Router uses a virtual SIM (vSIM) embedded in the device. There is no SIM card slot. If you experience connectivity issues, skip any SIM-related troubleshooting — use power cycle or factory reset instead.